Rebec CS470X
6 channel DSP
Read More
Behöver du hjälp? Vi finns här! Need help? We're here for you!
Ring 031-225560 eller maila oss support@dbakuten.se Call 031-225560 or email us at support@dbakuten.se
- 14 dagars öppet köp - 60 dagars bytesrätt 14-day return policy - 60-day exchange policy
- Fri frakt över 1000:- (Gäller ej hempaket eller pall) Free shipping over 1000 SEK (excludes home delivery and pallets)
- Stort eget lager snabba leveranser Large in-house stock, fast delivery
Similar Products
Description of Rebec CS470X
Rebec DSP-CS470X is a compact (19 x 14cm) DSP amplifier that can be connected to the car's original stereo. With the amplifier's built-in Bluetooth, you can stream music from your phone directly to the amplifier if the car's original one does not have this feature.
The amplifier offers 4 x 50W power for a four-ohm load or alternatively 4 x 65W for a two-ohm load.
The amplifier also has RCA line outputs for six channels (and a six-channel processor), so you can e.g. connect a separate amplifier to the subwoofer, and you can use Rebec's processor to do all the equalizers, time delay adjustments and crossover filters required by the subwoofer.
The processor is connected to the computer with a USB cable and you have a 31-band equalizer for all six channels.
All channels have their own high-pass and low-pass filters with 12/18/24/30db gradients, and all channels have their own time delay controls. In addition, you can adjust the input sensitivities of Bluetooth and speaker level separately.
NOTE: The amplifier always requires a vehicle-specific Plug & Play wiring kit, which is sold separately.
Amplifier power: 4 x 50W (4ohm) / 4 x 65W (2ohm)
RCA line outputs for six channels (2 volts)
Six-channel signal processor
Bluetooth music streaming
Playback range: 20Hz – 20kHz
A separate 31-band equalizer for each of the six channels
Each six channels have their own time delay settings (0-680cm / 0-20000ms)
Each six channels have their own low- and high-pass filters (20 – 20000Hz)
Pitches: 12 / 18 / 24 / 30dB
Signal to noise ratio: 99dB
Harmonic Distortion: <0.01% <0.03%
Connection: USB-A -> USB-B (cable included)
Dimensions: 190mm x 137.6mm x 36.6mm
What are Rebec Plug & Play wiring harnesses?
The Rebec wiring harness is connected between the car's original stereo and the wiring harness of the car's original stereo. The wiring harness brings the speaker signal from the car's original player to the amplifier, from where the speaker signal is amplified and adjusted by the processor back to the car's speakers.